Mixer Synopsis Introduction

1. Oil mixer is a new type of high efficient and energy-saving equipment specially developed for the debugging and process of oil storage tanks, which is mainly used for the mixing of oil in the tanks and the prevention of oil precipitation, etc. it can carry out omni-directional rotary jet mixing of oil in the tanks to make the oil in the tanks flow fully and eliminate the stratification of oil in the tanks on the top, in the middle and at the bottom, so as to play a role in mixing and stirring the oil in the tanks evenly. This product not only has a short mixing time, but a so reduces atmospheric pollution caused by the evaporation of oil in the tank, which is safe, environmentally friendly and energy-saving. 2. The oil mixer mainly consists of a driving body, a rotating injection sub-fluid, and an injection nozzle. The drive body is connected to the oil inlet pipe and installed vertically at the center of the tank bottom, us ng the momentum of th ol flowing through the tank to rotate the oil mixer body and the injection manifold by 360 degrees. Each oil nozzle is designed to correspond to a certain angle, so that the oil mixer in the storage tank Each nozzle is designed to correspond to a certain angle, so that the oillmixer can be sprayed in all directions in the tank, with strong effect and no dead angle. 3. This oil mixer has the features of even mixing, no dead angle, no precipitation, no tugging on the aluminum floating roof, low failure rate, and easy maintenance. Our company will make and design the mixer according to the customer's requirements, and redesign the angle and diameter of the oil jet in the case of certain pipeline and pump source, so as to make the oil in the tank mix evenly in the shortest time according to the actual situation on the site.